|Place of Origin:||Zhejiang,China(Mainland)|
|Minimum Order Quantity:||1 SET|
|Packaging Details:||Shrink film and wooden case packing|
|Delivery Time:||30-40 working days|
|Supply Ability:||20 Sets/Month|
|Max.Web Width:||1220mm||Max.Unwinder Diameter:||1500mm|
|Max.Rewinder Diameter:||1500mm||Thickness Of Paper:||80-450 Gsm|
|Max printing speed:||150m/min||Base motor power:||15kw-22kw|
|Warranty:||12 Month||After-sales Service:||Engineers Available To Service|
central drum flexographic printing machine,
flexographic printing equipment
High Speed Flexographic Printing Machine For Paper
About the Machine
1.Separate single-station unwinding rollstand with hydraulic lifting device; 3“ pneumatic shaft for loading material; Automatically constant tension controller for unwinding tension control and EPC web guide control system for material alignment; alarm function for reminding replacing material, stopping-machine device for detecting material broken.
2.The machine is mainly controlled by inverter-fed motor with synchronization belt.
3.Double rubber nipper roller is used for paper feeding, whose pressure can be adjusted by pneumatic component;taper tension control system ensures the printing accuracy.
4.Ceramic anilox roller for ink transferring; single-blade reverse ink-scraping system;
pneumatic clutch pressure for anilox rollers and plate rollers. Automatic Preventing Clogging Function: when the machine stops, the anilox roller will rotate to prevent the ink on its surface from drying and blocking holes (meshes) on it.
5.Double rubber nipper roller is used for paper feeding of rewinder, whose pressure can be adjusted by pneumatic component; equip with picture color detection system (Kesai).
6.Single-station rewinding rollstand with hydraulic lifting device; 3" pneumatic shaft for loading material; stopping-machine device for detecting material broken.
7.Separate drying system (electric heating); I.R. short-wave heater drying system (the temperature is adjustable); hot air and natural air drying system including exhaust fan and blower; central Exhaust System (waste gas will be exhausted centrally by exhaust fan, it is ready by user).
8.The whole machine is centrally controlled by siemens PLC system, which has monitors the machine status;the running speed can be adjusted at multiple points.
Main Technical Parameters
|4||Printing Repeat length||286--950mm|
|5||Die-cutting Repeat length||286--1200mm|
|9||Max printing speed||150m/min|
|10||Diameter of web roller||100mm|
|11||Base motor power||15kw--22kw|
|12||Drying mode||A.Warm Drying b.IR Drying|
|13||Oil Used||Aqueous Ink (or UV Drying& UV Ink)|
|14||Power Requirement||380V 3PH 50Hz|
|15||Substrate||40-300g chrome paper, BOPP, PET, Paper board, Kraft paper, non woven fabric|